Sterling Coilmaker – Plastic Coil Former
Making plastic coil just prior to insertion puts an end to working with twisted and deformed coil or coil with an improper pitch. Freshly made coil binds books more easily than coil taken out of a box. Cut the filament to the exact size you need, when you need it and cut down on waste, excess, and on storage. The cost of manufacturing coil is significantly less expensive than buying it preformed.
The Sterling® Coilmaker forms high quality plastic coil from plastic filament. This is achieved through the use of three axles pressing the filament against the forming mandrel as the coil is formed. Other coil formers only use two axles to press against the mandrel. This can cause “wobble” and produce coil that is not uniformly round, especially on larger sizes. This technology is why most of the plastic coil in America is made on this machine. The patented conveyor system ensures sufficient cooling time to make the most uniform coil available. The coil cools while it is still straight instead of laying twisted in a box. The heating element is infinitely variable to compensate for the ambient temperature at any given location. Tooling for sizes up to 50 mm is available for The COILMAKER.
Advantages at a Glance
- Forms high quality plastic coil from plastic filament
- Binds books more easily than coil taken out of a box
- Cut down on waste, excess and storage
- Makes the most uniform coil available
|Produces a 4:1 12” Length:||6 mm – 2 seconds
12 mm – 4 seconds
18 mm – 6 seconds
|Max. Coil Length with Conveyor:||17” (43 mm)|
|Max. Coil Length without Conveyor:||48” (122 mm)|
|Min. Coil Length||2” (5 mm)|
|Max. Coil Diameter:||1.96” (50mm)|
|Min. Coil Diameter:||.23” (6 mm)|