Graphic Whizard PT 9375SCC Supercut – Slit/Cut/Crease/Strike/Perf/Score

The Graphic Whizard PT 9375SCC Supercut is a complete full-bleed finishing system designed for the high-volume digital marketplace. Equipped with automated partial perforation, 2 interchangeable creasing/perfing dies, the PT 9375 SCC Supercut can run full bleed applications with creasing and perforating without any operator intervention.

The PT 9375SCC Supercut makes short work of; business cards, greeting cards, invitations, brochures, pamphlets, book covers, catalogs, posters, book/CD covers, photographs, tent cards, and more by simply loading the high capacity 6” automatic center registering vacuum pile feeder. Processing sheets up to 400 gsm at speeds of 32 sheets per minute (8.5” x 11”, 2 cuts, 1 crease) the 9375 SCC is an ideal finishing solution to maximize efficiency while minimizing operator intervention.

Advantages at a glance

  • 9″ touchscreen display and control
  • Trimposer software for outside PC connection
  • Programmable slit, cut, crease, perforate, partial perforate in one pass
  • 5.9′ High pile vacuum feeding system
  • X/Y image drift auto compensation
  • Stretch/shrink compensation
  • Ultrasonic double-feed detector / double sheet deflector
  • Barcode reader
  • Automatic partial perforation in both directions
  • Dual modules for up and down creasing
  • Register belt
  • Waste paper outfeed conveyor
  • Auto adjustment or table skew

Product Information



Product Video


Infeed Size:  Minimum: 8.26” x 8.26”   Maximum: 14.56” x 35.5”
Up to 47.24″ can be put in software
Outfeed Size: 1.97″ x 1.89″
Paper Weight: 120-400 gsm
Paper Type: Chrome, laminated, UV coated, uncoated, etc.
Load Capacity: 5.9″, 150 mm
Speed: 32 pcs/minute (A4, side trim+1 crease)
Register Mark: X and Y axis image drift compensation
Double Sheet Detection: Ultrasonic double-feed detection and deflector
Crease 2 dies – Up and Down. 1.0 mm standard (0.4/0.6/1.2/1.4mm) option
Crease Depth Adjustment: Auto adjustment according to thickness
Crease and Perf in One Pass: Up to 32 times for each in one pass (64 in total)
Slitting: 6 automatic slitters (Standard)
4 slitters for manual setting (Option)
Cutting: Up to 32 times in one pass
Accuracy: Cut ±(0.2-0.4)mm, Slit ±0.3mm, Crease ±0.2mm
Image Shrink and Stretch: X and Y axis compensation
Control and Display: 9 inch color touchscreen (PC Option)
Standard Partial Perforate: X axis (cross) -32 lines Y axis (linear) -2 lines
Skew Adjustment: Auto adjusted by setting in software
Crease/Perforate Module: 2
Optional Tools: Slitter, linear kiss cutter, scorer, Linear perforator (8/12/24/48 TPI), Linear Partial perforator, Cross perforator (6/8/12/24/52 TPI)