Single owner with meticulous Mitsubishi Maintenance.

Enter production only 23 March 2010

Equipped with:

– IPC II remote control for ink fountains and registers (axial, circumferential, and diagonal movement).

– Trivalent alcohol film dampening Mitsubishi.

– Alcohol circulator cooler with grinding temperature control.

– Semi-automatic plate change.

– Automatic paper thickness and format presetting.

– Blanket, roller and cylinder automatic washers.

– Non-stop sheet feeder.

– Chrome-plated printing cylinders.

– Ink Declutch (on the 1st and 5th printing units).

– Chamber doctor blade coating unit (TC) with two anilox rollers.

– Extended delivery (ED).

– Grafix IR/HA dryers.

– Grafix powder spray.

– Thickness: 0.04 – 0.6 mm.

– Format: 720 x 1020 mm

Available: immediate.

Visible: in production.

Condition: Excellent.

Description: Clean machine in good printing condition (single owner).

Note: IPC II (Intelligent Press Control) is a next-generation control terminal offering a fully compatible digital interface. Capable of interpreting diverse data across multiple digital networks, it easily performs printing operations with the help of a step-by-step display. From the control panel, the operator has direct access to all machine functions, from preparation and print start-up operations to quality control and fault diagnosis, with a simple touch of the screen. The IPC enables free data exchange between prepress and production management systems and allows the retrieval and storage of data generated in these systems, such as printing parameters, sheet format, ink fountain settings, and other settings. Furthermore, the IPC offers a fault diagnosis support function to quickly assist operators in determining the causes of press stoppages. It includes six software packages designed to optimize ink control before, at the end, and throughout the entire printing cycle. One of these software is Quick Start Inking (QSI) which, based on the image to be printed, guarantees the optimal thickness of the ink film before the cycle starts. 15″ color TOUCH SCREEN video. Memory capacity up to 5,000 jobs. Functions: start-up and production control; sheet format; printing pressure; trivalent dampening; ink/varnish concentration.

“Expert” software:

QSI determines the optimal ink film thickness based on the image to be printed before starting the cycle.

WiZARD schedules printing based on preset job start and end parameters.

* Production management * Maintenance * Troubleshooting * Automatic quick start * Waste reduction (up to 25 sheets) * Storage for up to 5,000 jobs * Network connection with (if present) PPC Server, IPC Server, MCCS II, and MAX-net * Ready to receive CIP 3/4 files *

WHAT YOU SHOULD KNOW

1. Only one Italian owner.

2. Never had any accidents or major maintenance.

3. Chrome-plated cylinders, without any visible repairs.

4. Excellent condition, will be dismantled after a technical inspection.

5. Visible in production with the possibility of testing printing.

6. Speed 13,000 s/h.

7. Paper thickness 0.04 – 0.4 mm.

8. Printing plate 800 x 1030 mm.

9. Length approx. 13.420 mm.

10. Width approx. 3.800 mm.

The Mitsubishi brand has been known in the graphics industry for decades for its great reliability. The DIAMOND series was introduced in 2002 and updated at Drupa in 2004. The various D3000 model variants are still fully functional, and spare parts are readily available. Trust the professionalism and experience of WGM. You’ll have a company ready to offer you the right solution for your needs.

The post Mitsubishi D3000S-5 TC/ED appeared first on Graphco.

16.000 imp. per hour.

Ca 170 mil prints.

Semi-Automatic plate change.

Plate Cocking.

All chrome cylinders.

Automatic paper preset system.

Automatic printing pressure preset.

Non- stop feeder.

Off press control.

Ink temp. Control.

Automatic ink roller wash-up.

Baldwin global Impact blanket.

Imp cylinders washers MHI.

Declutch on units 1+2+3

Technotrans refrigeration and recirculators.

Feeder and delivery with steel plates.

MHI delta dampener system.

Grafix powder sprayer.

Tresu coater AQ/UV with anilox roller

Extended delivery.

CIP3 software.

LC carton version: 0.2 – 0.8 mm

MCCS densitronic.

All manuals.

The post MITSUBISHI 3H-6+C appeared first on Graphco.

IPC III: command and control of all functions of the machine with Touch-screen, circumferential, axial and diagonal register, ink settings, self-diagnostic and remote control of ink fountains, memory jobs.

Preset: automatic adjustment of size.

Steel plate on feeder.

Non-stop feeder.

Electronic double sheet control.

Electronic missing sheet detector.

Suction tape feeder.

Pointing Wheel.

Photocells.

Alcohol film dampening with DELTA.

Multi-Mode Dampening System by Remote Control for Individual Unit.

Refrigeration with Automix.

Ink Declutch 1+2+5 unit & 6th Unit.

Automatic Washing of blankets, rollers.

Simultaneous plate changing.

Air Transfer system Skeleton.

Varnish unit with Harris & Bruno system.

Extended delivery with x modules.

Powder spray Grafix.

IR/HA Dryers Grafix.

ECO UV Dryers.

PPC Server software only for CIP 3/4.

Technical data:

Maximum Sheet Size: 1050 x 750 mm

Minimum Sheet Size: 540 x 360 mm

Maximum Printing Size: 1050 x 740 mm

Maximum Press Speed: 16200 sph

Sheet thickness: 0.04 to 1 mm

Machine Size (L x W x H): 14980 x 3840 x 2151 mm

Available: immediate.

Visible: in stock – Cleaned & Checked –

Note: All plates are changed in 75 seconds regardless of the number of printing units used. With the SimulChanger, plates from all units can be changed in just over a minute regardless of the number of printing units used. Unlike conventional plate changing systems where plates are removed and mounted unit by unit, the SimulChanger completes the operations simultaneously. The operator only needs to place the new plates into the respective plate holders, even during the previous job, and then start the plate changing operation from the machine console. All procedures, from adjusting the timing of the cylinders of each unit to removing the old plates, precisely mounting the new plates and repositioning each cylinder to its original position, are performed automatically. Eco-Drive Motor – The main motor of the DIAMOND V3000 is a highly efficient power source that provides all the power required by the machine and at the same time allows significant energy savings. Compared to conventional motors, costs are extremely reduced thanks to lower electricity consumption which also contributes to a healthier working environment. It was the 1st machine to feature LED technology in the casings (2008): Red: Machine in operation (plate change, cleaning and inking start, etc.) Blue: Anomaly in the safety devices and in the casings. Green: Preset sheet format, preset printing and other operations without production.

The post MITSUBISHI V3000LX-6+C appeared first on Graphco.

IPC II remote control for ink fountains and registers (axial, circumferential, and diagonal movement).

Trivalent alcohol film dampening Mitsubishi.

Alcohol circulator cooler with grinding temperature control.

Semi-automatic plate change.

Automatic paper thickness and format presetting.

Blanket, roller and cylinder automatic washers ELETTRA

Non-stop sheet feeder with automatic lateral movement of the paper pile.

Chrome-plated printing cylinders.

Ink Declutch (on the 1st and 5th printing units).

Grafix Megatronic powder spray.

CE certificate

X-RITE: Densitometric scanning system for automatic ink control in printing presses.

Visible: Milan.

Note: IPC II (Intelligent Press Control) is a next-generation control terminal offering a fully compatible digital interface. Capable of interpreting diverse data across multiple digital networks, it easily performs printing operations with the help of a step-by-step display. From the control panel, the operator has direct access to all machine functions, from preparation and print start-up operations to quality control and fault diagnosis, with a simple touch of the screen. The IPC enables free data exchange between prepress and production management systems and allows the retrieval and storage of data generated in these systems, such as printing parameters, sheet format, ink fountain settings, and other settings. Furthermore, the IPC offers a fault diagnosis support function to quickly assist operators in determining the causes of press stoppages. It includes six software packages designed to optimize ink control before, at the end, and throughout the entire printing cycle. One of these software is Quick Start Inking (QSI) which, based on the image to be printed, guarantees the optimal thickness of the ink film before the cycle starts. 15″ color TOUCH SCREEN video. Memory capacity up to 5,000 jobs. Functions: start-up and production control; sheet format; printing pressure; trivalent dampening; ink/varnish concentration.

“Expert” software:

QSI determines the optimal ink film thickness based on the image to be printed before starting the cycle.

WiZARD schedules printing based on preset job start and end parameters.

* Production management * Maintenance * Troubleshooting * Automatic quick start * Waste reduction (up to 25 sheets) * Storage for up to 5,000 jobs * Network connection with (if present) PPC Server, IPC Server, MCCS II, and MAX-net * Ready to receive CIP 3/4 files *

WHAT YOU SHOULD KNOW

1. Only one Italian owner with few original copies.

2. Never had any accidents or major maintenance.

3. Chrome-plated cylinders, without any visible repairs.

4. Good condition, will be dismantled after a technical inspection.

5. Visible in production with the possibility of testing printing.

6. Speed 16,000 s/h.

7. Paper thickness 0.04 – 0.6 mm.

8. Printing plate 800 x 1030 mm.

9. Length approx. 10.400 mm.

10.Width approx. 3.800 mm.

The Mitsubishi brand has been known in the graphics industry for decades for its great reliability. The DIAMOND series was introduced in 2002 and updated at Drupa in 2004. The various D3000 model variants are still fully functional, and spare parts are readily available. Trust the professionalism and experience of WGM. You’ll have a company ready to offer you the right solution for your needs.

The post MITSUBISHI D3000LS-5 appeared first on Graphco.