Punching Archives - Graphco https://graphco.com/product-category/specialty-finishing/punching/ The industry’s leading provider of digital, offset and print finishing solutions Wed, 24 Mar 2021 14:23:47 +0000 en hourly 1 https://wordpress.org/?v=6.9.4 https://graphco.com/wp-content/uploads/2019/02/cropped-graphco-favicon-1-32x32.png Punching Archives - Graphco https://graphco.com/product-category/specialty-finishing/punching/ 32 32 Sterling Digipunchmaster – Heavy-duty Automatic Paper Punching Machine https://graphco.com/product/sterling-digipunchmaster-high-speed-automatic-paper-punching-machine/ Fri, 31 Jul 2020 15:58:10 +0000 https://graphco.com/?post_type=product&p=15784 The Sterling® Punchmaster® is a heavy-duty, high-speed Automatic Punching Machine that automatically punches paper at speeds up to 110 strokes per minute. It can punch sheets from 20" x 17" down to 5" x 5.25".

Paper is collected in the high pile receding stacker which can be re-loaded in a few minutes.

The automatic touchscreen allows for the automatic setting of the holes' rear margin. This is especially useful for binding wire bound books on fully automatic wire binders.

Speed up your punching with The Sterling Digipunchmaster.

Product Information

  Brochure

The post Sterling Digipunchmaster – Heavy-duty Automatic Paper Punching Machine appeared first on Graphco.

]]>  

Minimum Sheet Size: 5” x 5.25” (127 mm x 140 mm)
Maximum Sheet Size: 20” x 17” (500 mm x 430 mm)
Speed: Up to 110 strokes per minute

 

The post Sterling Digipunchmaster – Heavy-duty Automatic Paper Punching Machine appeared first on Graphco.

]]> SCS Automaberg Trim & Perf – Die-cut, Trim, Split, Cut, Perforate, Punch https://graphco.com/product/scs-automaberg-trim-perf-die-cut-trim-split-cut-perforate-punch/ Thu, 24 Jan 2019 14:22:25 +0000 http://server.graphco.com/product/import-placeholder-for-3098/ The SCS Automaberg Trim & Perf is a highly versatile and productive line which is a genuine “all-in-one” solution for finishing operations. The line can include different work stations for multiple tasks and process optimization. The combination of the Trim & Perf with complementary modules offers high-quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding and, in particular, the production of specific products for single and multi-up work in a single pass.

SCS Automaberg specializes in “On Demand” products and is always able to offer non-standard solutions.

 

Advantages at a Glance:

  • Easily moveable
  • In-feed belt table adjustable in height for easy connection with upstream machines
  • The complementary modules allow an easy connection in-line with other machinery
  • Handles any material
  • By simply pushing a button, the Trim & Perf is transformed into a regular conveyor belt, no bypass or similar equipment needed
  • The production of specific products also on request, will be met by the use of different accessory tools and the complementary modules
  • 1, 2, 3 workstations for the manufacture of products up to 8 mm thick (e.g.: diaries, calendars, notebooks, exercise books, children’s board books) which can be saddlestitched, square back or perfect bound
  • Pocket-folders, CD-wallets, straight-line boxes, expandable folds, capacity folds and mailings
  • Ideal for:
    • Flat cardboard, also laminated up to 2 mm thickness
    • 3-way perfect alignment of digital sheets to a print reference mark
    • Folded and stitched product die-cut without waste
    • Non-standard solution on demand also on plastic material up to 1 mm thickness
    • Pre-cut device perfect spine cutting system up to 14 mm thickness
    • Standard radii from 3 to 15 mm
    • Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole

     

    Product Information

      Product Brochure
    [video_lightbox_youtube video_id="esKSLeLHZgw&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="esKSLeLHZgw&rel=0" width="640" height="480" anchor=" Product Video 1"]
    [video_lightbox_youtube video_id="FC1ym7UjRCc&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="FC1ym7UjRCc&rel=0" width="640" height="480" anchor=" Product Video 2"]
    [video_lightbox_youtube video_id="4QtMyOPR0vM&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="4QtMyOPR0vM&rel=0" width="640" height="480" anchor=" Product Video 3"]
    [video_lightbox_youtube video_id="n6YV8yXzqXE&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="n6YV8yXzqXE&rel=0" width="640" height="480" anchor=" Product Video 4"]
    [video_lightbox_youtube video_id="AtCv5Q7hiss&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="AtCv5Q7hiss&rel=0" width="640" height="480" anchor=" Product Video 5"]
    [video_lightbox_youtube video_id="8topv6Eif_c&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="8topv6Eif_c&rel=0" width="640" height="480" anchor=" Product Video 6"]

The post SCS Automaberg Trim & Perf – Die-cut, Trim, Split, Cut, Perforate, Punch appeared first on Graphco.

]]>  

Product Size Untrimmed (LxW):
(sizes subject to jobs)		 Maximum: 19.68” x 23.62” (500 mm x 600 mm)
Minimum: 1.96″ x 1.96″ (50 mm x 50 mm)
Product Thickness:
 Maximum: .157″ (4 mm)
Maximum: .55″ (14 mm) (optional)
Speed Maximum Mechanical: 9,000 cycles/hr

 

* Values refer to the basic model

The post SCS Automaberg Trim & Perf – Die-cut, Trim, Split, Cut, Perforate, Punch appeared first on Graphco.

]]> Sterling Digipunch – High-speed Automatic Paper Punching Machine https://graphco.com/product/sterling-digipunch-high-speed-automatic-paper-punching-machine/ Thu, 24 Jan 2019 14:15:26 +0000 http://server.graphco.com/product/import-placeholder-for-2771/ The Sterling® Digipunch® is an economical High-speed Automatic Paper Punching Machine designed for short-run binderies, as well as digital and commercial printers. The machine allows for punching up to 60,000 sheets per hour. That's a big pile of paper for a small machine and a half million sheets per shift.

The Sterling® Digipunch® features a variable pile lift, which allows for slowing the machine down for difficult jobs, such as stock that is curled, stock with static, or acetate. Punch sheets with covers or with tabs intermixed.

A touchscreen offers complete automatic set-up and automatic changeovers. The touchscreen takes the guesswork out of the maintenance cycle by prompting operators when it's time to lubricate or sharpen the die. Unlike many other machines, it's possible to run the machine in reverse to clear jam-ups.

Punch sheets from 4.25” X 5.5” to 12” X 14” for plastic coil, double loop wire, plastic comb, three hole- or any hole pattern. The optional drum bypass is a belt changeover system for heavy board. This will enable the sheet to be delivered without having to bend by traveling around the drum.

The Sterling® Digipunch® offers the latest development in paper punching equipment to make swift set-up and changeovers. Embrace the latest in digital technology with The Sterling® Digipunch®.

Advantages at a Glance

  • Stabber: The stabber can be set to stab 3 - 17 sheets. This is more consistent than punches that rely on gravity to feed the paper.
  • Die: The dies can be changed in seconds. Pull pins result in faster changeovers between sheet sizes.
  • Registration Table: This registers the paper on all four sides, using side guides and rear stops. The rear stops accommodate sheets intermixed with tabs.
  • Stacker: The receding stacker operates in tandem with the feeder, each of which can hold five reams of paper. The machine stops when the stacker is full.
  • Touchscreen: The Digipunch's touchscreen guides you through the entire punching process. You choose the paper size from a variety of pre-sets or enter a custom size. Choose how many sheets you want to punch per lift, punching less for problem stocks. The computer will track the maintenance cycle of each die that is used, prompting when to lubricate or sharpen the die. It also prompts the operator when safety covers are open. The manual is contained in the touchscreen computer with a variety of tips and tricks to make the operation of the machine quick and easy.

 

Product Information

  Brochure
[video_lightbox_youtube video_id="ZBXpGu6Zi-U&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="ZBXpGu6Zi-U&rel=0" width="640" height="480" anchor=" Product Video "]

The post Sterling Digipunch – High-speed Automatic Paper Punching Machine appeared first on Graphco.

]]>  

Minimum Sheet Size: 4.5” x 5.5” (114 mm x 140 mm)
Maximum Sheet Size: 12” x 14” (305 mm x 356 mm)
Speed: Up to 60 strokes per minute

 

The post Sterling Digipunch – High-speed Automatic Paper Punching Machine appeared first on Graphco.

]]> Sterling Punchmaster – High-speed Automatic Paper Punching Machine https://graphco.com/product/sterling-punchmaster-high-speed-automatic-paper-punching-machine/ Thu, 24 Jan 2019 14:15:26 +0000 http://server.graphco.com/product/import-placeholder-for-2780/ The Sterling® Punchmaster® is a High-speed Automatic Paper Punching Machine and the paragon of automatic punching, considering its speed and versatility. It will punch for double-loop wire binding, spiral, plastic coil binding, T-slots, or plastic comb binding faster than any automatic punch on the market. It will also punch double row wrap around covers, windows, door hangers, and tags. The machine can punch any shape hole, anywhere on the sheet.

Punch at 130 strokes per minute or 125,000 sheets per hour on the Sterling® Punchmaster®. The machine employs four-way registration to ensure dead on accuracy. The Punchmaster can be pre-loaded while running so that the operator is free to off-load the sheets and deliver them to the binder. The shingling of the sheets on the variable-speed conveyor maximizes efficiency and facilitates quality control. An air feeder is available enabling the punching of: heavy board, signatures, or special stock. A jogger may be added to the system by simply lifting up the delivery tray and placing the jogger at the end of the conveyor. Since the Punchmaster is built in the United States, parts are readily available.

The Punchmaster will punch signatures or single sheets from 4” x 5” cards all the way up to 20” x 22” calendars. Punch a variety of stock such as: paper, board, plastic, vinyl, or leather as well as aluminum sheets.

This machine can handle a greater variety of jobs than any other punch and can produce many products that are die-cut more quickly and cleanly without the need for stripping. It can also punch many jobs that would otherwise have to be punched manually. If you cannot punch it on the Punchmaster, it cannot be punched automatically. Punch it all with the Punchmaster.

Advantages at a Glance

  • Stabber: The stabber stabs a lift of paper, adjustable between 2 and 30 sheets, and pulls the paper into the belts irrespective of wave, curl or static.
  • Lifter Stabber: The optional lifter stabber lifts the paper prior to stabbing. This is especially useful when punching thicker stock that can split.
  • Die: The punch-through die allows for punching anywhere on the sheet, useful for windows, door hangers & wrap around covers. The sheet passes through the die and then into the turn around drum.
  • Air Feeder: The optional air feeder is designed to feed signatures, board, plastic, leather, or even pocket folders. It lifts one sheet or signature at a time, prior to feeding it into the belts.
  • Calendar Hole Punch Attachment: Punch hanger holes on the face of a calendar while simultaneously punching a hole pattern on the spine of the sheet. This option can be retrofitted to existing Punchmasters.
  • Micro Die Adjustment: The patented Micro Die Adjustment allows you to "fine tune" the centering of a sheet. It can move the die side-to-side in increments less than .010” (.25 mm).
  • Drum Bypass: The optional drum bypass is a belt changeover system for heavy board. This will enable the sheet to be delivered without having to bend by traveling around the drum.
  • Corner Perforation Attachment: Punch corner perforation holes while simultaneously punching a hole pattern on the spine of the sheet. This option can be retrofitted to existing Punchmaster machines.

 

Product Information

  Brochure
[video_lightbox_youtube video_id="nCa2S4539JY&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="nCa2S4539JY&rel=0" width="640" height="480" anchor=" Product Video "]

The post Sterling Punchmaster – High-speed Automatic Paper Punching Machine appeared first on Graphco.

]]>  

Minimum Sheet Size: 4” x 5” (20 cm x 12 cm)
Maximum Sheet Size: 20” x 22” (50 cm x 55 cm)
Speed: Up to 130 strokes per minute

 

The post Sterling Punchmaster – High-speed Automatic Paper Punching Machine appeared first on Graphco.

]]> Horizon RD-3346 Rotary Die-cutter https://graphco.com/product/horizon-rd-3346-rotary-die-cutter/ Thu, 24 Jan 2019 14:07:43 +0000 http://server.graphco.com/product/import-placeholder-for-2130/ The Standard Horizon RD-3346 Rotary Die-cut System meets the growing demand for short-run applications. It’s well-suited for small applications such as tags and business cards. The RD-3346 die-cuts and kiss-cuts various flexible substrates up to 0.013′′ thickness for digital and offset printed sheets. At speeds up to 5,000 cycles per hour, feeding, die-cutting and separating are achieved in one pass.

 

Advantages At a Glance

  • Rotary Die-cut System – Rotary die-cutter designed to meet the growing demand for short-run products. The rotary die-cutters are light and compact compared to normal die-cutters.
  • Flexible Substrate – Die-cut and kiss-cut in various substrates for digital and offset printed sheets.
  • One Pass Processing – Feeding, die-cutting and separating are achieved in one pass.
  • Save the Cost of Making Die – Uniquely designed servo motor controlled “repeat register” feature allows multiple-up applications from single-up die to minimize die cost.
  • Simple and Easy Operation – Reduces costly labor steps and increases productivity with easy set-up and operation versus steel rule or mechanical dies.

 

Product Information

  Brochure

[video_lightbox_youtube video_id="efz_HMRcYg0&rel=0" width="640" height="480" anchor="https://graphco.com/wp-content/uploads/2017/04/pdfsmall-2.png"][video_lightbox_youtube video_id="efz_HMRcYg0&rel=0" width="640" height="480" anchor=" Product Video"]

The post Horizon RD-3346 Rotary Die-cutter appeared first on Graphco.

]]> Sheet Feeding System: Vacuum Belt-feed Sheet Size:
(before processing) Maximum: 12.04” W x 17.32” L
Minimum: 7.88” W x 10.83” L Finished Sheet Size:
(with separator) Maximum: 12.04” W x 17.32” L
Minimum: 1.58” W x 2.37” L Finished Sheet Size:
(without separator, with nicks) Maximum: 12.36” W x 17.32” L
Minimum: Depending on die shape Processes Material: Normal paper, coated paper, cardboard Material Thickness: 127.9 to 400 gsm Feeder Pile Height: 19.68” Production Speed: Up to 5,000 cycles per hour

 

The post Horizon RD-3346 Rotary Die-cutter appeared first on Graphco.

]]>