Foliant 400T

General Info

Foliant 400T
Manual Laminating Machine

The Foliant 400T is a simple manual laminating machine, designed with an operating width of 14.9″ (380 mm). It represents an ideal choice for a professional in-house single side lamination in small offset and digital print shops. The maximum speed is up to 23’/ minute (7 meters/min). Fully equiped with an adjustable decurl bar, the design provides easy operation in a machine that uses limited floor space. A modular Stand is supplied optionally.

The Foliant 400T laminator handles a maximum sheet size of 14.9″ x 25.9″ (38 x 58 cm)  with a minimum sheet size of 8-1/2″ x 11″ (30 x 25 cm / A4). The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 10,000′ (3000 m) of the 1.2 mil (31 microns) film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process proceeds between two laminating rollers – a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is mechanically adjustable to achieve the pressure between the laminating rollers.

The Foliant 400T is a manual machine, for an easy paper loading the laminating unit is equipped with a synchronized feeding conveyor and an adjustable side guider. Separation of laminated sheets are handled manually. Due to the perforation of film which is done in the process of laminating, the whole process is easy. An optional separator unit can be added at a later date.

The machine laminates OPP films 1 mil to 1.7 mil (23 – 42 microns).

Options

Modular stand MS400 – Is a simple steel stand for the machine.

Film Supply Roll Shaft  – Having an extra Film Supply Roll Shaft allows for quicker film replacement.


 

Product Video

Product Photos