Foliant 400S

General Info

Foliant 400S
Laminator with Separator

The Foliant 400S is a simple semi-automatic laminating machine with a laminator and separator designed with an operating width of 14.9″ (380 mm). It represents an ideal choice for a professional in-house single side lamination in small offset and digital print shops. The maximum speed is up to 23’/ minute (7 meters/min). Fully equiped with an adjustable decurl bar, the design provides easy operation in a machine that uses limited floor space. A modular Stand is supplied optionally.

The Foliant 400S laminator handles a maximum sheet size of 14.9″ x 25.9″ (38 x 58 cm)  with a minimum sheet size of 8-1/2″ x 11″ (30 x 25 cm / A4). The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 10,000′ (3000 m) of the 1.2 mil (31 microns) film. The film holder unit is equipped with a trim slitter and a perforating wheel.

The laminating process is done between two laminating rollers, an upper heated silicone roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is mechanically adjustable to achieve the pressure between the laminating rollers and the laminating unit is equipped with an adjustable decurl bar.

The belt separator (sheeter) is equipped with a separating roller and a deflection wheel. The separated sheets are delivered into an optional reception unit or a vibrating jogger. The Foliant 400S is a semiautomatic machine. The feeding is easily handled manually with a synchronized feeding conveyor and an adjustable side guider. The machine laminates OPP films 1 mil to 1.7 mil (23 – 42 microns).

Options:
• Film Supply Roll Shaft  – Having an extra Film Supply Roll Shaft allows for quicker film replacement
• Jogger 400* – An adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited up to a 10 cm pile of sheets.
• RU 400 Reception unit* – It is a simple adjustable reception unit for stocking the laminated sheets.

*Important: The machine must be used either with a RU400 or Jogger 400

 


 

Product Video

Product Photos